Alaxala AX2400S series Anleitung zur Fehlerbehebung PDF herunterladen (Seite 207)

3. Troubleshooting Functional Failures During Operation

137

When using SNMPv3

Execute the show snmp-server configuration command, and check whether the information

about SNMP and traps has been set correctly in the configuration of the Switch. If the

information has not been set correctly, execute the following configuration commands to set

the information about SNMP and traps.

•

snmp-server engineID local

• snmp-server view

• snmp-server user

• snmp-server group

• snmp-server host

(config)# show snmp-server

snmp-server engineID local "engine-ID"

snmp-server group "v3group" v3 priv notify "view1"

snmp-server host 20.1.1.1 traps "v3user" version 3 priv snmp

snmp-server user "v3user" "v3group" v3 auth md5 "abc*_1234" priv des "xyz/

+6789"

snmp-server view "view1" 1.3.6.1 included

(config)#

Some SNMP manager systems might not be able to receive ospf and /jointfilesconvert/367816/bgp traps issued under

SNMPv2C or SNMPv3. If so, check the trap reception setting for the SNMP manager based on the

object ID of each type of traps described in the manual MIB Reference.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 304 305

Keine Kommentare

Alaxala AX2400S series Anleitung zur Fehlerbehebung Seite 207